| Specification Item | Unit | DC650R-M |
| Die Closing | Die locking force | kN | 6500 |
| Platen dimensions (VxH) | mm | 1200 x 1200 |
| Tie-bar spacing (VxH) | mm | 850 x 850 |
| Tie-bar diameter | mm | 160 |
| Die thickness | mm | 900 ~ 350 |
| Die stroke | mm | 660 |
| Injection | Maximum injection force | kN | 550 |
| Intensification ratio | | 1 : 2.52 |
| Plunger stroke | mm | 670 |
| Tip protrusion | mm | 300 |
| Injection port position (From machine center) | mm | -175 |
| Injection speed | m/s | 0.03 ~ 7.0 |
| Tip diameter | mm | 75 ~ 95 |
| Sleeve length | mm | 405 |
| Ejection | Ejection force | kN | 294 |
| Ejection stroke | mm | 10 ~ 125 |
| Hydraulic | Number of movable cores | Size x No. | 1/2″ x each 1 |
| Number of movable core ports | No. of Set | 3/4″ x 4 |
| Operating pressure | Mpa | 15 |
| Required hydraulic oil volume | ℓ | 900 |
| Hydraulic oil tank capacity | ℓ | 750 |
| Water | Die cooling water inlet port size | Rc | 1 + 1/2″ |
| Die cooling water outlet port size | Rc | 3″ |
| Oil cooler water inlet port size | Rc | 1″ |
| Oil cooler water outlet port size | Rc | 1″ |
| Die cooling adjustment valve (fixed) | Rc x No. | 1/4″ x 7 |
| Die cooling adjustment valve (moving) | Rc x No. | 1/4″ x 10 |
| Sprue bush cooling adjustment valve | Rc x No. | 1/4″ x 2 |
| Required cooling water (oil cooler) | L/min | 50 |
| Required cooling water (for die) | L/min | 70 ~ 120 |
| | | |
